MOTORISED ACCESSORIES
AND EFFECTS FOR PROJECTORS

We have a wide range of accessories that enrich the number of applications and possible creative features of all PROIETTA projectors. Dynamic effects, shapers, image changers, and a complete range of lenses for optimum projections and variable distances, from 50 cm to over 1000 metres.

Section 1

PRO DMX4

Is a new electronic board that allows to control any dynamic/motorized accessory unit through a software configured from the display mounted on the same board. It is geared toward image switch and color change or fading programs but can be also useful to have complete control of any of the dynamic accessories accepted by the projector other than gobo and color wheels (it allows to manage up to 4 different stepper engines simultaneously).

It can also be used to automatically switch the images (steel or glass gobos) or the colored dichroic filters and prismatic lenses applied to the color wheel simultaneously on different projectors and to autonomously create fading effects among the different images held by the same projector or between the images or effects projected by two or more projectors connected in series through the 3-pole DMX input and output sockets (located at the bottom of the board).

In this way, with two or more projectors operating in MASTER/SLAVE chain mode, can be achieved to contemporarily change color or image and get a syncronized effect between a virtually unlimited number of projectors or to create a crossfading effect between two different projections on the same projection surface.

Each unit includes a motorized wheel suitable as gobo wheel or color wheel. Other wheels and effects (such as an additional color wheel or a shatter/dimmer wheel to create fades) may be purchased separately on request.

IMPRESSIVE CODE: M-WEDMX

DMX device with control panel for managing up to 4 effects (motors)
CODE IMP-DMX4
Motor and support for wheels
CODE MOT-IMP-DMX
DMX motorized wheeel diam. 70 mm for 4 gobos / shutter / coloured filters cod. fil70
CODE WH-70
COD. fil50 dmx motorized wheeel diam. 50 mm for 6 gobos / shutter / coloured filters cod. fil50
CODE WH-50

VIDEO TUTORIAL

Section 2

MOVING IMAGES WITH MOTORIZED MIRROR 

The image projected turns in a circular or elliptical way, going from the floor to a wall or up to the ceiling, rotating in small or larger loops according to the orientation of the mirror.

Accessori per proiettori
I-MIRROR

Section 3

SHAPER

Applicable to the projectors to shape the edges of the projection or to refine the image or graphics in a defined spaceIdeal for illuminating a picture even from an angle pronounced than the frame.

PROJECTION SAMPLE WITH AND WTHOUT SHAPER

VIDEO TUTORIAL

Section 4

IMAGE ROTATION

This accessory permits the rotation of an image at a constant speed in such a way that the image is always readable. It is ideal for the projection of a logo or an image in movement on any type of architectural surface or paving.

It can also be used together with a multiplying prism, which gives the effect of an image multiplied many times revolving about itself.

VIDEO TUTORIAL

Section 5

COLOR CHANGE DEVICE

This device allows to change the color of a logo or an architectural surface in a continuous way, making it fade constantly.

M-CONT-COL

Section 6

DICHROIC FILTER – FIL70

They are made of special tempered glass dichroic and have an unlimited durationYou can enter in the change image for use as a color change, or individually for coloring a mono chromatic color logo you want.

Vetri dicroici
CODE: 01
DARK BLUE
CODE: 02
LIGHT BLUE
CODE: 03
LIGHT CYAN 
CODE: 04
DARK RED
CODE: 05
GREEN
CODE: 06
MAGENTA
CODE: 07
ORANGE
CODE: 08
RED
CODE: 09
SKIN
CODE: 10
YELLOW

Section 7

PRISM COLOR

Dynamic projection of colors that blend and mingle each other:

Code I-PRISM-COLOR

VIDEO TUTORIAL

Section 8

POLE BRACKET

Ideal for mounting a projector on the wall, when a pole or balcony is present.

This accessory is ideal when you do not have any other means for mounting your projector, it permits a safe and secure hold taking advantage of pre-existent supports such as railings, balconies, poles etc… or it permits the installing directly on a wall using dowels.

Staffa da palo per proiettori
Staffa da palo per proiettori
Code I-BRACK
Installation of brackets on tubular pole